Sony 50P Operating Instructions Manual page 46

Recording
46
(GB) Chapter 3 Playback and Recording
1
Turn on the POWER switch.
2
Set the INPUT SELECT selector to CAMERA.
3
Set up the camera for shooting.
For details, refer to the instruction manual of the camera.
4
Set the audio input selectors to CAM.
5
Set the audio input level control selectors properly according to the
audio level of the camera.
6
Select the audio input level adjustment mode in the AUDIO SELECT
switches.
7
If necessary, adjust the audio input level by turning the audio recording
level control knobs.
You can adjust the recording level with the audio recording level
control knobs if you have selected MANU in step 6. While looking at
the audio level meters on the LCD monitor or the display window, turn
the audio recording level control knobs and adjust the recording level.
Adjust the audio recording level so that the recording level does not
exceed 0 dB when the audio signal is at its maximum. If the recording
level exceeds 0 dB, the OVER indicators light.