Sony 50P Operating Instructions Manual page 36

Connections
To digital video equipment with the DV jack
36
(GB) Chapter 2 Preparations
The video and audio signals are sent with hardly any degradation, enabling
high-quality recording. The signal flow is automatically detected so you
need not make separate connections for input and output.
Digital video equipment
with a DV jack
to the
DV jack
i.LINK cable (DV cable)
(not supplied)
Notes
• The DV IN/OUT connector in the unit is a 6-pin type but does not
provide power to external equipment.
• With the DV connection, the data codes (recording date/time, camera
data) recorded on the tape in the player will be transmitted to the unit. To
display the same data code recorded on the source tape, set the DATA
CODE on the DISPLAY SET menu to DATE or CAMERA, or press the
DATA CODE button on the DSRM-20 remote control unit (not supplied)
when you play back the recorded tape. However, the contents of the
cassette memory are not transmitted. If you want to transmit the contents
of the cassette memory, use the duplicate function.
For details on duplicate function, see "Duplication (generating a work tape with
the same time code)" on page 70 (GB).
• When no picture appears via the DV jack, disconnect, then reconnect the
i.LINK cable (DV cable).
DSR-50/50P (right panel)
: Signal flow