Sony 50P Operating Instructions Manual page 91

Submenu
Icon/Menu
(page)
FOOT SW
VTR SET
VTR
DV EE OUT
(page 37 (GB))
STILL PICT
Setting
Selects a foot switch mode.
OFF : Disables the foot switch.
EDGE HIGH: Switches between recording and recording pause mode each time you
release the foot switch.
EDGE LOW: Switches between recording and recording pause mode each time you press
the foot switch. (This is the most popular use for foot switch.)
LEVEL HIGH: Records only while the foot switch is released.
LEVEL LOW: Records only while the foot switch is pressed.
The following shows the trigger statuses.
EDGE HIGH
Recording
EDGE LOW
Recording
The following shows the foot switch circuit.
DSR-50/50P
5 V
Stereo
minijack
GND
Tally LED
Foot Switch
Note
You cannot operate audio dubbing or duplication from the foot switch.
Selects the output from the DV IN/OUT connector in the EE mode.
OFF : Outputs only the playback video and audio signals from the DV IN/OUT connector.
ON: Outputs the selected analog input signals from the DV IN/OUT connector.
Note
When you connect a computer to the DV IN/OUT connector, depending on your computer
software, the selected analog input signals may be output to the computer even if this item
is set to OFF.
Switches the image displayed in the still mode.
AUTO : Displays an optimized image according to the movement in the image.
FRAME: Displays a frame image.
FIELD: Displays a field image.
Note
If you select FIELD, the image of field 2 is displayed.
LEVEL HIGH
Recording
pause
LEVEL LOW
Recording
pause
Chapter 6 Adjusting and Setting Through Menus
Recording Recording
pause
Recording Recording
pause
91
(GB)