Sony 50P Operating Instructions Manual page 60

Setting the Time Code and User Bits
To select the time code/user bits to record
on the tape
You can set the time code and user bits to record on
the tape by setting TC/UB IN on the TC/UB SET
menu.
INTERNAL: Uses the internal time code/user bits.
TC&UB EXT: Uses the external time code/user bits.
TC EXT: Uses the external time code and internal
user bits.
UB EXT: Uses the internal time code and external
user bits.
Notes
• This unit has a DV IN/OUT connector. The time code
input or output is different when you connect the unit
to an external device via this DV IN/OUT connector
or via another input/output connector.
For details, see "DSR-50/50P time codes" on page 62
(GB).
• The time code output from this unit has some
restrictions.
For details, see "Notes on the Time Codes" on page 63
(GB).
60
(GB) Chapter 4 Setting the Time Code and Adjusting the Video Signals