Ed-1E434, Group 200 Cable; Table P. Ed-1E434, Group 200 Cable Connection (Phase 2) - AT&T System 85 Installation And Test

ED -1E434, Group 200 Cable
Install the ED -1E434, Group 200 cables (Figure 34) from the RMI carrier backplane(s) to the
backplane of the central module(s) selected to provide the on-line and maintenance signals to
the RMI carrier. Connect the cables from E00, E01, E02, and E03 on the RMI carrier
backplane to the next available electrical port on the designated module control carrier(s)
(Table P).
TABLE P. ED-1E434, Group 200 Cable Connection (Phase 2)
RMI Carrier
Connector
E00 E01*
E02 E03
Module Control 00 01 00
01
Carrier
Electrical
1 E35 E35 E04
E04
Port Number
2 E32 E32 E09
E09
3 E34
E34 E08 E08
4 E37 E37
E13 E13
5 E39
E39 E12 E12
6 E36
E36 E17 E17
7 E38
E38 E16 E16
8
E41 E41 E21 E21
9 E43 E43 E20
E20
10 rE 40 rE 40
E25 E25
11 1E42 \E42 E24
E24
* RMI Carrier Conne&or E 01 and E03 are used
for Duplicated Sysams only.
1,Atc+
Page 49