Connectors And Sockets; Viewing Recordings On A Television; Transferring Recordings To A Computer - Targa CR 3 A1 Operating Instructions And Safety Instructions

12. Connectors and sockets

12.1 Viewing recordings on a television

Any recordings that you can view on the Dashboard Camera display (13) can also be played on a
normal television. The television set needs to have an appropriate HDMI input.
A HDMI cable with a Mini HDMI connector (not supplied) will also be required. The HDMI cable
provides digital images and sound and therefore optimum quality. The HDMI output (16) can be found on
the Dashboard Camera top panel.
While the device is connected to the TV via the HDMI cable, video recording is not available. It
is only possible to play previously recorded content and to capture still images.
Simply operate the device as usual.
Connecting the HDMI cable
1. Please make sure that your Dashboard Camera is powered off.
2. Insert the Mini HDMI plug of the optional HDMI cable into the Mini HDMI output (16) on the
Dashboard Camera (see also "Overview" on page 12).
3. Plug the larger connector of the HDMI cable into the HDMI receptacle of your TV set.
4. Select the HDMI signal source corresponding to the above input connectors on your TV set. If
necessary, read the User Manual of your TV set for more information on how to do this.
5. Press the On/Off button (8) to power the Dashboard Camera on. The device display (13) remains off
while the entire picture will be shown on the TV Screen.
Further information can be found in the "Playback" section on page 28 and in "Playback menu" section on
page 40.

12.2 Transferring recordings to a computer

There are two possible ways to copy recordings from the Dashboard Camera to a computer:

by connecting the device to a computer via the USB cable

by inserting the SD memory card into a card reader.
CR 3 A1
English - 45