Charging The Battery; Charging The Battery With A Usb Cable - Targa CR 3 A1 Operating Instructions And Safety Instructions

4. To remove the car mount from the windscreen, flip the lever (21) up again and then pull on the
release tab (23) on the suction pad.

6.3 Charging the battery

The Dashboard Camera battery can be charged via the USB port on a computer or with the car charger
supplied.
In addition to the following options, you can also connect the Dashboard Camera to an
external USB power adapter (not supplied) in order to charge the Dashboard Camera. You
can purchase a suitable 5V USB power adapter with at least 1A output current from any
electronics retail outlet.
WARNING!
connecting it. Read the User's Manual of your optional power adapter.

6.3.1 Charging the battery with a USB cable

WARNING!
leave at least one USB port on the PC free (no devices connected).
1. Use the USB cable to connect the Dashboard Camera to an
available USB port on a computer. Insert the Mini USB plug
(24) of the supplied USB cable into the Mini USB/charging
connector (14) of your Dashboard Camera and the large plug
(25) into a USB port on your computer.
2. The Dashboard Camera will then turn on automatically and you
will be asked to select the "Mass Storage" mode.
Some computers do not supply USB power while they are
turned off. If the Dashboard Camera does not charge,
make sure your computer is switched on.
3. Press the OK button (5) to confirm. On first use we recommend you switch the device off initially,
leave the battery to charge (until the red charge LED (12) goes off) and then define basic settings
such as language, date and time etc. before performing further steps. To power the Dashboard
Camera off, press and hold the On/Off button (8) for approx. 3 seconds.
Be sure to familiarise yourself with the optional power adapter before
If you want to charge the Dashboard Camera battery via the PC, make sure to
CR 3 A1
English - 17