Video Recording Menu - Targa CR 3 A1 Operating Instructions And Safety Instructions

CR 3 A1

11.1 Video recording menu

The video recording menu allows you to set the different video recording parameters. To open the video
recording menu:
1. Power the Dashboard Camera on by pressing the On/Off button (8). Or, if you have connected the
car charger or an optional USB power adapter, the Dashboard Camera will switch on automatically
as soon as it receives power.
2. Press the OK button (5) to stop recording.
3. Press the Menu button (3) to display the menu associated with video recording.
4. Make the desired adjustments. To do this, use the Up (2) and Down (4) buttons to select the desired
option and confirm by pressing the OK button (5). Next you can use the Up (2) and Down (4) buttons
to select the desired value and confirm by pressing the OK button (5).
5. Press the Menu button (3) again to hide the menu.
The following sections contain a description of the different parameters available in the video recording
menu.
Resolution
The resolution determines the size of the recording in pixels. As a general rule: the higher the resolution,
the more storage space is required.
Your Dashboard Camera supports recording in modern wide-screen format. However, not all of the
resolutions available offer a 16:9 aspect ratio. With the VGA setting, the aspect ratio is 4:3.
The following settings are available:
Resolution
VGA 640x480
WVGA 848x480
720p 1280x720
1080FHD 1920x1080
32 - English
Description
VGA screen quality
Normal quality
Average quality
High quality