Loop Recording - Targa CR 3 A1 Operating Instructions And Safety Instructions

K
x4.0
L
M
N
O
P
Press the Down button (4) during recording to mute the microphone or to reactivate it.

8.1 Loop recording

Loop recording is a function in which video clips of a certain length (e.g. 5 minutes) are recorded. After
that recording time, a new video file is automatically created. As you record videos, the optional microSD
memory card fills up. Once the storage space has been used up, the oldest video in the current recording
is automatically overwritten. This ensures that recording is always possible, even when the storage space
has actually all been used up.
In this mode, you should ensure that any recordings you wish to keep are either protected (see "Protecting
videos from being overwritten during loop recording" on page 24) or transferred to a different storage
medium (e.g. your PC, see "Transferring recordings to a computer" on page 45).
To set the clip length for loop recording:
1. Stop video recording and press the M (3) button to open the menu.
2. Press the Down (4) or Up (2) button several times until the "Loop recording" option is selected.
3. Press the OK button (5) to open the "Loop recording" option.
4. Press the Down (4) or Up (2) button several times to highlight the desired clip length and press OK (5)
to confirm. Or select "Off" to disable loop recording.
5. When finished, press the M (3) button to close the menu.
Audio icon: indicates whether or not the video is being recorded with (
or without ( ) sound.
Zoom indicator
G-Sensor enabled
Exposure compensation: The possible values range from -2.0 to +2.0 in 1/3
EV increments.
Motion detection enabled
Loop recording: The possible recording times for the individual clips are 3
minutes, 5 minutes, 10 minutes or Off.
CR 3 A1
)
English - 23