Taking Still Images - Targa CR 3 A1 Operating Instructions And Safety Instructions

9. Taking still images

In this mode your Dashboard Camera acts like a conventional digital camera that you can take photos
with.
Once you have switched the device on, as described in the "Switching the Dashboard Camera on" section
on page 19, and selected still image capture mode, you can take photos with or without the car mount
during your journey.
1. If you are using the Dashboard Camera without the car mount, aim the Dashboard Camera at the
desired subject with the help of the display (13).
2. If necessary, select a larger or smaller section of the image (zoom) using the Up (2) and Down (4)
buttons. Press the Up (2) button to bring the subject closer or the Down button (4) to make the subject
appear further away.

Keep the Up (2) or Down (4) button pressed for faster zoom in or out.

After the photo has been taken, the digital zoom factor is reset to 1.0.
3. Press the OK button (5) to take the photo.
The image will be saved automatically under a unique name.
For more information, please see the section "Still image capture menu" on page 35.
During recording, different icons may appear on the display (13) informing you about the current settings.
CR 3 A1
English - 25