Targa CR 3 A1 Operating Instructions And Safety Instructions page 45

Setting
Date/Time
Car NO
Auto Power Off
Parking Monitor
Description
Set the date and time (see also "Setting the date/time" on page 20).
Enter the number plate ID of your car:
Press the Mode button (6) to toggle between the following options:
: No character input (to enter spaces)
: Letter input
: Digit input
Then press the Up (2) or Down (4) button several times to select the
desired character and press the OK button (5) to apply it. The cursor
moves to the next field.
Repeat the above steps as many times as necessary until you have
entered the number plate ID of your car.
When done press the M button (3) to save the changes and exit the
menu.
You can get the device to power off automatically after a certain time
to save battery. If no buttons are pressed during the preset time, the
device powers off automatically. To switch the Dashboard Camera
back on, press the On/Off button (8).
You can choose between the power-off times of 1 minute, 3 minutes,
5 minutes and 10 minutes or disable the automatic power-off function.
With this function the Dashboard Camera can monitor any possible car
movement while the ignition (and therefore the Dashboard Camera) are
switched off. For instance, if an impact from a car parking in front of yours is
detected, recording starts automatically. So it's easy to obtain some
evidence when any damage has been caused from the other parking car.
The available options are "On" or "Off".
CR 3 A1
English - 43