Targa CR 3 A1 Operating Instructions And Safety Instructions page 46

CR 3 A1
Beep Sound
Language
Frequency
Screen Saver
Format
Default Setting
Version
44 - English
Here, you can set whether or not the Dashboard Camera makes a
sound every time you press a button.
The available options are "On" or "Off".
Select the desired display menu language (see also "Setting the menu
language" on page 20).
Select the mains frequency to avoid any interference from fluorescent
lighting. A mains frequency of 50 Hz is used across Europe; in America
the mains uses a frequency of 60 Hz.
To save power and to protect the screen you can have the display (13)
switch off after a certain time. In this case only the blue recording LED
(11) will light.
You can choose between the power-off times of 1 minute, 3 minutes,
5 minutes and 10 minutes or disable the screen saver function.
To reactivate the picture when the screen saver has engaged, press
any button except the On/Off button (8).
This function lets you delete all contents from your memory card
(optional accessory) and renew the file saving structure on your card
(formatting).
Warning! All saved videos and pictures will be erased and cannot be
restored. This also applies to protected files. Make sure that all
recordings you want to keep have been backed up to a different
storage medium.
All device parameters will be reset to their factory-default values.
This does not erase any data from your memory card.
This function displays your Dashboard Camera's current firmware
version. You might need this information when contacting customer
services for example.