Setting The Menu Language; Setting The Date / Time - Targa CR 3 A1 Operating Instructions And Safety Instructions

CR 3 A1

Or, if you have connected the Dashboard Camera to your car's cigarette lighter using the car charger
and this can be turned on and off with the ignition key, switch the ignition off to turn off the Dashboard
Camera. The message "GOODBYE" appears and the Dashboard Camera switches off automatically.

7.3 Setting the menu language

The procedure described below only works when the Dashboard Camera is NOT connected to
the computer with the USB cable. If necessary, first disconnect the USB cable from the
USB/charge port (14) on the Dashboard Camera.
Power the Dashboard Camera on by pressing the On/Off button (8). Or, if you have connected the
1.
car charger or an optional USB power adapter, the Dashboard Camera will switch on automatically
as soon as it receives power.
Press the OK button (5) to stop recording.
2.
Press the M button (3) twice to show the "Setup" menu.
3.
Press the Down button (4) to open the "Setup" menu.
4.
Press the Down (4) or Up (2) button several times until the "Language" option is selected.
5.
Press the OK button (5) to open the "Language" option.
6.
Press the Down (4) or Up (2) button several times to highlight the desired language and press OK (5)
7.
to confirm.
When finished, press the M (3) button to close the menu.
8.

7.4 Setting the date / time

The procedure described below only works when the Dashboard Camera is NOT connected to
the computer with the USB cable. If necessary, first disconnect the USB cable from the
USB/charge port (14) on the Dashboard Camera.
1. Power the Dashboard Camera on by pressing the On/Off button (8). Or, if you have connected the
car charger or an optional USB power adapter, the Dashboard Camera will switch on automatically
as soon as it receives power.
2. Press the OK button (5) to stop recording.
3. Press the M button (3) twice to show the "Setup" menu.
4. Press the Down button (4) to open the "Setup" menu.
5. Press the Down (4) or Up (2) button several times until the "Date/Time" option is selected and press
OK (5) to confirm.
6. Press the Down (4) or Up (2) button several times to set the value currently selected and press the OK
button (5) to apply it.
20 - English