Making Audio Interface Settings - Zoom H8 Operation Manual

Making audio interface settings

The following two settings can be made when using the
Enabling direct monitoring
This directly outputs the sound being recorded through the
iOS/iPadOS device. This enables monitoring without latency.
1.
After connecting a computer or iOS/iPadOS device, tap
2.
Tap Direct Monitor, and set it to On.
Setting loop back (Stereo Mix only)
This function mixes the playback sound from the computer or iOS/iPadOS device with the
the mix back to the computer or iOS/iPadOS device (loop back).
This function can be used to add narration to music played back from the computer and to record the mix or
stream it on the computer, for example.
1.
After connecting a computer or iOS/iPadOS device, tap
2.
Tap Loopback, and set it to On.
H8 as an audio interface.
H8 from the H8
on the app screen.
on the app screen.
107
before sending it to the computer or
H8 input and sends