Table of Contents
Advertisement
76
Information
If the stitch numbers programmed for each seam section are not
displayed in automatic mode, the function StitchCount must
be activated.
If the stitch counter is deactivated, the seam section change will
be deactivated following the programmed number of stitches.
No stitch counts are displayed for the individual seam sections,
and no automatic seam section change is performed following the
completion of the programmed stitch count. A seam section
change can then only be executed manually using the arrow
button.
The Count Stitches function is activated/deactivated using
the softkey menu ( p. 76).
5.4.1
Softkey menu and softkey functions in
automatic mode
Fig. 47: Softkey menu and softkey functions in automatic mode (1)
①
②
(1) - Upper softkey
The softkey buttons serve the following functions in automatic
mode:
• upper softkey (1): The button can be assigned a softkey func-
tion for quick access
• lower softkey (2): quick access to the softkey menu during
the sewing process
Operating Instructions 550-12-33/34 - 00.0 - 08/2017
(2) - Lower softkey
Programming
Advertisement
Table of Contents
