Programming
Operating Instructions 550-12-33/34 - 00.0 - 08/2017
Symbol Description
Ruffling support (Ruffl. Support)
The following additional settings can be activated to support
ruffling:
• Needle thread tension (Thr. Tens. Top)
• Hook thread tension (Thr. Tens. Bot)
• Tape tension (Tape Tension)
p. 110
Piece counter (DailyPieces)
Daily piece counter, can be set to count either up or down.
When the daily piece counter is activated, it must be reset
once after entering a value using the function in the softkey
menu to ensure it counts correctly.
◄/►
20. Use
to switch to the
21. Confirm with OK.
The seam program menu opens.
▲/▼
22. Use
to select the desired parameter.
23. Press the OK button to activate or deactivate the parameter
▲/▼
or use
to edit the value, enter new values using the
numeric buttons and confirm the change by pressing OK.
Use ◄
to exit the submenu.
The changed values are stored immediately.
24. To exit the seam program menu, press the ESC button.
The parameters adjusted for the seam program are stored.
25. To add additional seam sections, press the upper softkey
selection.
.
97