Table of Contents
Advertisement
Programming
Operating Instructions 550-12-33/34 - 00.0 - 08/2017
Important
There are now 2 different options that vary with the piece that was
taught.
• sideless
• left/right piece
P flashes if a sideless piece was taught.
27. Adjust the parameters for the seam program ( p. 99).
If a left/right piece was taught, the display switches to:
Fig. 57: Teaching a new seam program (programming mode)(5)
The following functions are now available:
•
Do not mirror the seam program (button 2):
While not mirrored now, the seam program can be mirrored
later at any time ( p. 108).
•
Mirror the seam program (button 4):
The created left/right side is mirrored, allowing you to imme-
diately select and sew the desired side in automatic mode
( p. 79).
•
Teach other side (button 5):
After teaching a left/right piece, teach the other piece now.
Important
Teaching the other piece only makes sense if the pieces are
not supposed to be exactly mirror-inverted. Otherwise, it
makes sense to mirror the left/right piece.
28. Select the desired function.
29. Repeat steps 5-17 if necessary.
89
Advertisement
Table of Contents
