Table of Contents
Advertisement
Available languages
Available languages
4.6.2
Switching the sequence mode on / off
4.6.3
Select a sequence in the sequence mode (Main menu)
4.6.4
Automatic or manual mode
02 ð 05 ð 12 ð 09
02 – 05 – 12 – 09
Switching the sequence mode on or off
–
Press the S-key.
The control panel changes to the menu for the programming of
buttonholes sequences.
With the arrow keys ñ and ò select the relevant line
–
–
Press the OK-key.
With the arrow keys ñ and ò choose between on(sequence mode)
–
or off (single buttonhole mode)
–
Confirm by pressing the OK-key.
–
To return to the main menu press the ESC-key.
After switching on, the top line of the display will appear white on
black. The last used sewing sequence will be displayed.
Select another sequence
–
Press the OK-key.
–
Moving between the sequences can be achieved by using the
arrow keys ñ and ò.
–
Confirm by pressing the OK-key.
Automatic operation
In the sequence that is shown on the display, arrows will be displayed
between the buttonhole forms.
–
After sewing a buttonhole, the control will change automatically to
the next buttonhole form.
–
After sewing the last buttonhole, the control will change again to
the first buttonhole within the sequence.
–
The current buttonhole will be indicated with a bar.
–
The form of each chosen buttonhole will be shown in the left half of
the display.
Manual operation
In the sequence that is shown on the display, no arrows will be
displayed between the buttonhole forms.
–
The control does not change automatically between the buttonhole
forms.
–
The current buttonhole will be indicated with a bar.
–
The form of each chosen buttonhole will be shown in the left half of
the display.
Change between automatic and manual operation
–
Choose the relevant line in which the current sequence is
displayed using the arrow keys ñ and ò
–
Press the OK-key.
–
Change between the two operational modes using the arrow keys
ñ and ò.
–
Confirm by pressing the OK-key.
1
23
Advertisement
Chapters
Table of Contents
