DURKOPP ADLER 550-12-33 Operating Instructions Manual page 113

Programming
Operating Instructions 550-12-33/34 - 00.0 - 08/2017
Needle thread tension for ruffling support
The parameter Ruffling support (Ruffl. Support) offers
the option of setting up the needle thread tension more accurately:
Parameter Setting
Mode (Mode)
Needle thread
tension
(Thr. Tens.
Needle
Top)
thread
tension
(Thr. Tens.
Initial ruffling
Top)
value
(Ruffl. Min.)
Maximum
ruffling value
(Ruffl. Max.)
Hook thread tension for ruffling support
The parameter Ruffling support (Ruffl. Support) offers
the option of setting up the hook thread tension more accurately:
Parameter Setting
Mode (Mode)
Hook thread
Hook thread
tension
tension
(Thr. Tens.
(Thr. Tens.
Bot)
Bot)
Function
Set whether the needle thread
tension will increase with the ruffling
value
Value: linear/off
Set the percentage by which the
needle thread tension is supposed
to rise starting with the initial ruffling
value.
Factory default settings: Increase
by 40%
Set the initial ruffling value from
which the needle thread tension is
supposed to increase linearly.
Value: 0-16
Set the maximum ruffling value up
to which the needle thread tension
is supposed to rise.
Value: 0-16
Function
Set whether the hook thread tension
will increase with the ruffling value
Value: linear/off
Set the percentage by which the
hook thread tension is supposed to
rise starting with the initial ruffling
value.
Factory default settings: Increase
by 40%
111