Table of Contents
Advertisement
Programming
Operating Instructions 550-12-33/34 - 00.0 - 08/2017
5.6.2
Creating a new seam program on the control
panel
You can create new seam programs using the control panel OR
as a teach-in ( p. 83).
The creation of a seam program on the control panel is performed
without sewing. New seam sections can be added and deleted.
All parameters for the seam sections and the seam program are
programmed manually.
Information
Every new seam program is based on the preset values that have
been assigned at the factory and can only be changed at the
Technician level ( Service Instructions).
To create a new seam program using the control panel:
Assigning a new seam program number
1.
Switch to edit mode ( p. 90).
2.
To open the softkey menu, press the lower softkey
The softkey menu appears.
3.
To create a new seam program, press the
The display switches to:
Fig. 59: Creating a new seam program on the control panel (1)
The display shows the next available seam program number.
.
button.
91
Advertisement
Table of Contents
