Table of Contents
Advertisement
92
4.
Seam program number
• Confirm with OK or
• Change using
• Re-enter using the numeric buttons 0-9
Information
The machine displays only available seam program slots/accepts
only available seam program slots entered numerically.
5.
Confirm with OK.
The display switches to:
Fig. 60: Creating a new seam program on the control panel (2)
Defining a sideless/left/right piece
Important
Once the seam program has been saved, this setting can no longer
be changed.
►
6.
Use
to switch to the
7.
If the seam program is intended for a left/right piece, set the
desired side using
L = left piece
R = right piece
If you do not change the setting -, the machine will create
a seam program for a sideless piece.
Adding new seam sections
►
8.
Use
to switch to the
The display switches to:
Operating Instructions 550-12-33/34 - 00.0 - 08/2017
▲/▼
or
selection.
▲/▼
.
selection.
Programming
Advertisement
Table of Contents
