Table of Contents
Advertisement
K2200 Series | User Guide | 5.0
Printer
Shown below is the alarm, the alarm cleared and acceptance report for unauthorized access and anti-tamper.
Figure 7: Unauthorized Access/Anit-Tamper Alarms
11/11/93 16:27 FRONT DOOR
11/11/93 16:27 FRONT DOOR
11/11/93 16:28 FRONT DOOR
11/11/93 16:34 FRONT DOOR
11/11/93 16:35 FRONT DOOR
11/11/93 16:36 FRONT DOOR
Door Controller Override
A door controller override input has been activated. This causes all the doors on the door controller to open.
D/C 1 OVERRIDE
Printer
Shown below is the alarm, alarm cleared and acceptance report.
Figure 8: Door Controller Override Alarm
11/11/93 14:18 DOOR CTRLR 1
11/11/93 14:18 DOOR CTRLR 1
11/11/93 14:18 DOOR CTRLR 1 MASTER KEY
Zone Alarm
An alarm module input has been activated.
IP 001 ACTIVE
Printer
Shown below is the alarm, alarm cleared and acceptance report.
Figure 9: Zone Alarm
11/11/93 17:24 ZONE
11/11/93 17:24 ZONE
11/11/93 17:24 ZONE
Duress Alarm
A PIN Reader Duress alarm. A key holder has gained entry using a PIN reader, but has entered their duress
code (normal PIN +1).
DURESS 02 ALARM
Printer
Shown below is the alarm and acceptance report.
Bosch Security Systems | 7/03 | 17376 v1.1 / 47491C
Displays, Alarms, and Printing
MASTER KEY
MASTER KEY
1
1
1
MASTER KEY
Unauthorized Access
Alarm Cleared
Local Alarm Accepted
Anti-tamper Alarm
Alarm Cleared
Local Alarm Accepted
Override Alarm
Override Alarm Reset
Local Override Accept
Alarm Zone Active
Zone Restored, ReArmed
Local Alarm Accepted
EN | 29
Advertisement
Table of Contents
