Siemens SICAM Manual page 90

Parameterization
A.2 Parameterizing the User Interface
Table A-7
COMMUNICATION
PARAMETERS
DEVICE PARAME-
TERS
NOTE
i
i
The device resets if one of the following parameters is changed:
•
Frequency
•
Neutral-point treatment
•
Baud rate
•
Parity
•
Ground-fault detection I
•
Ground-current acquisition (calculation/measurement)
90
Parameters Menu Structure - Communication and Device Parameters
▶ MODBUS PARAMETER
BAUD RATE
PARITY
▶ DEVICE LANGUAGE
DATE AND TIME
DATE AND TIME
DATE AND TIME
DATE AND TIME
VERSION INFORMA-
TION
SELF TEST
PASSWORD PROTEC-
TION
CHANGE PASSWORD
>, when the parameter is changed above or below the threshold of 1 A
N
▶ MODBUS ID
▶ 1 to 247
▶ SAVE
▶ 2400 bps to 115 200 bps
▶ SAVE
▶ NONE or EVEN or ODD
▶ SAVE
▶ ENGLISH or DEUTSCH or ESPAÑOL or PORTUGUÉS or
FRANÇAIS
▶ SAVE
▶ DATE SETTINGS
▶ DATE TODAY
▶ 2012 to 2099/1 to 12/1 to 31
▶ SAVE
▶ DATE FORMAT
▶ DD-MM-YYYY or MM-DD-YYYY or YYYY-MM-DD
▶ SAVE
▶ TIME SETTINGS
▶ TIME NOW
▶ 0 to 23/0 to 59/0 to 59
▶ SAVE
▶ TIME FORMAT
▶ NEW TIME FORMAT
▶ 12 HOUR or 24 HOUR
▶ SAVE
▶ ACTIVE FIRMWARE VERSION INFORMATION IS
DISPLAYED
▶ ACTIVATES SELF TEST
▶ DISABLE OR ENABLE
▶ SAVE
▶ ENTER NEW PASSWORD
SICAM, Feeder Condition Monitor, Manual
E50417-H8940-C580-A4, Edition 03.2019