Siemens SICAM Manual page 155

Reactive Power Q2 for Phase 2
(Address, see Table
power for phase 2 measured every 15/30/45/60 minutes, 24 hours, 1 month, and 1 year respectively.
Refer to Reactive Power Q1 for Phase 1, Page
Reactive Power Q3 for Phase 3
(Address, see Table
power for phase 3 measured every 15/30/45/60 minutes, 24 hours, 1 month, and 1 year respectively.
Refer to Reactive Power Q1 for Phase 1, Page
Apparent Power S1 for Phase 1
(Address, see Table
power for phase 1 measured every 15/30/45/60 minutes, 24 hours, 1 month, and 1 year respectively.
Bit 15
2 15
Bit 7
2 7
Format
Unit
Range
Apparent Power S2 for Phase 2
(Address, see Table
power for phase 2 measured every 15/30/45/60 minutes, 24 hours, 1 month, and 1 year respectively.
Refer to Apparent Power S1 for Phase 1, Page
Apparent Power S3 for Phase 3
(Address, see Table
power for phase 3 measured every 15/30/45/60 minutes, 24 hours, 1 month, and 1 year respectively.
Refer to Apparent Power S1 for Phase 1, Page
SICAM, Feeder Condition Monitor, Manual
E50417-H8940-C580-A4, Edition 03.2019
B-16) This register contains the minimum values and the maximum values of the reactive
154.
B-16) This register contains the minimum values and the maximum values of the reactive
154.
B-16) This register contains the minimum values and the maximum values of the apparent
14 13
2 14 2 13
6 5
2 6 2 5
16-bit unsigned integer
1/10 kVA for 230-V sensor
1 kVA for 3.25/√3 sensor, for 100/√3 sensor, and for 400/√3 sensor
0 to 65535
B-16) This register contains the minimum values and the maximum values of the apparent
155.
B-16) This register contains the minimum values and the maximum values of the apparent
155.
B.8 Register-Type Data – Trailing Pointers
12 11 10
2 12 2 11 2 10
4 3 2
2 4 2 3 2 2
Modbus Registers
9 8
2 9 2 8
1 0
2 1 2 0
155