Siemens SICAM Manual page 148

Modbus Registers
B.6 Register-Type Data – Analog Input Registers
Refer to Last Reset Time (Year), Page
Overcurrent Alarm Type
(Address 26) This register defines the phase in which the overcurrent alarm is occurred.
Bit 15
Not used
2 15
Bit 7
Not used
2 7
Format
Unit
Range
Overcurrent Alarm Time (Milliseconds)
(Address 27) This register contains the overcurrent alarm time in milliseconds.
Refer to Last Reset Time (Milliseconds), Page
Overcurrent Alarm Time (Hours and Minutes)
(Address 28) This register contains the overcurrent alarm time in hours and minutes.
Refer to Last Reset Time (Hours and Minutes), Page
Overcurrent Alarm Time (Month and Date)
(Address 29) This register contains the overcurrent alarm time in month and date.
Refer to Last Reset Time (Month and Date), Page
Overcurrent Alarm Time (Year)
(Address 30) This register contains the overcurrent alarm time in years.
Refer to Last Reset Time (Year), Page
Overcurrent Warning Type
(Address 31) This register defines the phase in which the overvoltage warning is occurred.
Bit 15
Not used
2 15
Bit 7
Not used
2 7
Overcurrent Warning Time (Milliseconds)
(Address 32) This register contains the overcurrent warning time in milliseconds.
Refer to Last Reset Time (Milliseconds), Page
Overcurrent Warning Time (Hours and Minutes)
(Address 33) This register contains the overcurrent warning time in hours and minutes.
Refer to Last Reset Time (Hours and Minutes), Page
148
145.
14 13
Not used Not used
2 14 2 13
6 5
Not used Not used
2 6 2 5
16-bit unsigned integer
–
–
144.
144.
145.
14 13
Not used Not used
2 14 2 13
6 5
Not used Not used
2 6 2 5
144.
12 11 10
Not used Not used Not used
2 12 2 11 2 10
4 3 2
Not used Not used I
3
2 4 2 3 2 2
144.
12 11 10
Not used Not used Not used
2 12 2 11 2 10
4 3 2
Not used Not used I
3
2 4 2 3 2 2
144.
SICAM, Feeder Condition Monitor, Manual
E50417-H8940-C580-A4, Edition 03.2019
9 8
Not used Not used
2 9 2 8
1 0
I I
2 1
2 1 2 0
9 8
Not used Not used
2 9 2 8
1 0
I I
2 1
2 1 2 0