Siemens SICAM Manual page 88

Parameterization
A.2 Parameterizing the User Interface
▶
▶
Table A-5
PROCESS
PARAMETERS
88
CROSSBLOCK ▶ 0 ms to 60 000 ms
TIMER
▶ OK
TIMER LOGIC ▶ TIMER LOGIC T1 ▶
▶ TIMER LOGIC T2 ▶
▶ TIMER LOGIC T2 ▶
Parameters Menu Structure - Timer Logic and Process Parameters
▶ CORRECTION ▶ DISABLE (Default)
FACTOR
▶ ENABLE
▶ VOLTAGE ▶ LV TO MV CALCU-
PARAMETERS LATION
▶ CAPACITIVE
VOLTAGE MEAS-
UREMENT
▶ RATED SEC.
VOLTAGE
▶ RATED PRI.
VOLTAGE
▶ SENSOR VOLTAGE
PRIMARY
▶ VOLTAGE CORREC-
TION FACTOR
0 to 60 s
(Enhanced fault validation and reset function
is disabled)
▶ SAVE
0 to 25 s
(Enhanced fault validation and reset function
is disabled)
▶ SAVE
0 to 240 s
(Enhanced fault validation and reset function
is disabled)
▶ SAVE
▶ TRANSFORMER
TYPE
▶ TRANSFORMER
ANGLE
▶ PRIMARY
VOLTAGE
CORRECTION
▶ AUTO CALIBRA-
TION VOLTAGE
▶ AUTO CALIBRA-
TION
▶ AC 3.25/√3 or AC 100/√3 V or AC 230 V or
AC 400/√3
▶ SAVE
▶ 1.0 kV to 36.0 kV
▶ SAVE
▶ 1.0 kV to 36.0 kV
▶ SAVE
▶ V MAGNITUDE
1
FACTOR
▶ V ANGLE OFFSET
1
▶ V MAGNITUDE
2
FACTOR
▶ V ANGLE OFFSET
2
SICAM, Feeder Condition Monitor, Manual
E50417-H8940-C580-A4, Edition 03.2019
▶ DY-11
▶ 0° to 359°
▶ SAVE
▶ 0 V to 900 V
▶ SAVE
▶ 1000 V to 36000 V
▶ SAVE
▶ START AUTO CALI-
BRATION
▶ OK