Siemens SICAM Manual page 104

Modbus Registers
B.2 Implementation of the Modbus Protocol
Address Min/Max Value
27 –
28 –
29 –
30 –
31 –
32 –
33 –
34 –
35 –
For more information about register-type data – events, see
Table B-8
Address Min/Max Value
299 –
300 0 to 65535
301 to 0 to 65535
491
302 to 0 to 59999
492
303 to 0 to 23
493
0 to 59
304 to 1 to 31
494
1 to 12
305 to 12 to 99
495
306 to 0 to 9999
496
307 to 0 to 9999
497
308 to 0 to 9999
498
309 to 0 to 65535
499
310 to –
500
Read or write accesses to any addresses beyond the defined address range can cause the exception code 02. If
any value written beyond the range of defined value display the exception code 03. The modified values
contained in the registers are saved during a device reset.
For more information about register-type data - trailing pointers, see
Pointers.
104
Parameters
Overcurrent alarm time (milliseconds)
Overcurrent alarm time (hours and minutes) h and min
Overcurrent alarm time (month and date)
Overcurrent alarm time (year)
Overcurrent warning type
Overcurrent warning time (milliseconds)
Overcurrent warning time (hours and
minutes)
Overcurrent warning time (month and date) month and date
Overcurrent warning time (year)
Events
Modbus Data
Type
–
Inp-Reg
Inp-Reg
Inp-Reg
Inp-Reg
Inp-Reg
Inp-Reg
Inp-Reg
Inp-Reg
Inp-Reg
Inp-Reg
Inp-Reg
Unit
ms
month and date
year
–
ms
h and min
year
B.7 Register-Type Data -
Parameters Unit
Reserved for future use –
Event counter –
Event type –
Time in milliseconds ms
Time in hours and h and min
minutes
Time in month and date month and date
Time in year year
Phase current I A
1
Phase current I A
2
Phase current I A
3
Ground current I 1/100 A
N
Reserved –
B.8 Register-Type Data – Trailing
SICAM, Feeder Condition Monitor, Manual
E50417-H8940-C580-A4, Edition 03.2019
Type
uInt16
uInt16
uInt16
uInt16
uInt16
uInt16
uInt16
uInt16
uInt16
Events.
Type
–
uInt16
uInt16
uInt16
uInt16
uInt16
uInt16
uInt16
uInt16
uInt16
uInt16
uInt16