Parameterization; A.1 Parameterization - Siemens SICAM Manual

Parameterization

A.1 Parameterization

A.1 Parameterization
This chapter describes the various parameter menus and the possible parameter settings that can be executed
via the user interface. Parameters can also be set remotely by using the RS485/Modbus interface. The parame-
ters are stored in the respective Modbus registers. For more information about Modbus, see
ters
Display and User Controls
The device menu screen contains the following user interface elements:
[le_sfcmdeflcdscrn, 2, en_US]
Figure A-1
(1) Header area
(2) Display area
(3) Footer area
•
Header
The header area displays the title and status of the feeder.
•
Display
The display area shows the default measured values, such as currents, voltages, power, and frequency.
•
Footer
The footer area contains the respective menu navigation functions. You can navigate through the menu
using the keypads by selecting a value or editing the device settings. The following functions are
assigned to the navigation keys:
– Battery Freshness Mode (BFM)
Enables the Battery Freshness Mode. For more information, refer to
– MENU
Calls the main menu
– OK
Opens the submenu from the selected main menu
– Save
Permanently saves the last set value and returns from edit mode to display mode
– Edit
Opens the edit mode of the device settings
– ↑↓
The up and down arrow is used to move the cursor. It is also used to scroll within the menu list and
for selecting or entering numerical values.
You can also parameterize the device using the SICAM FCM Configurator tool. For more information, refer to
the SICAM FCM Configurator Manual.
82
Default Menu with Display and User Controls
B.1 Modbus Regis-
4.1.39 Battery Freshness
SICAM, Feeder Condition Monitor, Manual
E50417-H8940-C580-A4, Edition 03.2019
Mode.