Preface - Siemens SICAM Manual

Preface

Purpose of the Manual
This manual describes the application, functions, installation, and operation of the SICAM Feeder Condition
Monitor (FCM) 6MD232xx.
Target Audience
Protection system engineers, commissioning engineers, persons entrusted with the setting, testing and main-
tenance of automation, selective protection and control equipment, and operational crew in electrical installa-
tions and power plants.
Scope
This manual applies to SICAM Feeder Condition Monitor (FCM) 6MD232xx; firmware version V03.30.
Indication of Conformity
Standards
IEEE Std C 37.90 and EN 55011
IEC/EN 62271-1: 2007-10
IEC/EN 61243-5: 1997-06
Support
Our Customer Support Center provides a 24-hour service.
Siemens AG
Customer Support Center
Humboldtstraße 59
90459 Nürnberg
Germany
SICAM, Feeder Condition Monitor, Manual
E50417-H8940-C580-A4, Edition 03.2019
This product complies with the directive of the Council of the European Communities
on the harmonization of the laws of the Member States relating to electromagnetic
compatibility (EMC Directive 2014/30/EU) and concerning electrical equipment for use
within specified voltage limits (Low Voltage Directive 2014/35/EU) as well as restriction
on usage of hazardous substances in electrical and electronic equipment (RoHS Direc-
tive 2011/65/EU).
This conformity has been proved by tests performed according to the Council Directive
and in accordance with the generic standard IEC/EN 61326-1 (for EMC directive) and
with the standards IEC/EN 61010-1 and IEC/EN 61010-2-30 (for Low Voltage Directive)
by Siemens AG.
The device is designed and manufactured for application in an industrial environment.
RoHS directive 2011/65/EU is met using the standard EN 50581.
The product conforms with the international standards of IEC 61326-1.
3