In ter face and panel out sta tions
.
c)
Remove the backing from one side of an A5 adhesive sheet. Apply to
the reverse side of the printed A4 site plan or zonal plan sheet, so
that when attached to the LED blocks it will be in the position shown
by the dotted line, see Figure 3-3. Press the adhesive sheet down
firmly.
d)
Remove the remaining backing from the adhesive sheet attached to
the plan sheet.
e)
Align and fit the plan sheet to the LED blocks and smooth out any
air bubbles.
VIG-MIM-A4 A4 Mimic panel
Figure 3-3 A4 Mimic plan and buzzer configuration
Vigilon Sys tem Com mis sioning
cdm20