Table of Contents
Advertisement
Figure 71
1. Jumper hoses
7.
Keep all bystanders away from the machines.
8.
Start the second machine and move the lift lever
to the raise position, which raises the disabled
cargo bed.
9.
Move the hydraulic-lift lever to the N
position, and engage the lift-lever lock.
10.
Install the bed support onto the extended lift
cylinder; refer to
34).
Note:
With both the machine turned off, move
the lift lever back and forth to remove the system
pressure and ease the disconnection of the
quick couplers.
11.
After completing the operation, remove the
jumper hoses and connect the hydraulic hoses
to both machines.
Important:
Check the hydraulic fluid
levels, in both machines, before resuming
operation.
EUTRAL
Using the Bed Support (page
Cleaning
Washing the Machine
The machine should be washed as needed. Use
water alone or with a mild detergent. A rag may be
used when washing the machine.
Important:
Do not use power washing equipment
g019543
to wash the machine. Power washing equipment
may damage the electrical system, loosen
important decals, or wash away necessary grease
at friction points. Avoid excessive use of water
near the control panel, engine, and battery.
Important:
Do not wash the machine with the
engine running. Washing the machine with the
engine running may result in internal engine
damage.
60
Hide quick links:
Advertisement
Table of Contents
