IBM RT PC Problem Determination Manual page 47

Step 10. Updating the Test List
Before you can run the diagnostics, you must update the
DIAGNOSTIC TEST LIST.
1. Read and follow the instructions as they appear on the screen.
2. If a list of options is displayed, compare your screen with the
list of options for your system. See
of adapters and devices installed.
3. If the THERE IS A HARDWARE PROBLEM IN YOUR
MACHINE screen is displayed, report the problem. Otherwise,
CONTINUE to the next page when the DIAGNOSTIC
SELECTION menu is displayed.
CONTINUE to next page.
User Setup Guide
Section 2. Hardware Problems 2-19
for a list