IBM RT PC Problem Determination Manual page 315

M ask = 02 VRM c o m p o n en t - V irtu a l T erm in a l R esource
M anager
or
LINE, FIELD,
invalid parameter.
Module_ID = VTMUPD RC = 6549 D01 = 04
This error occurred because the virtual
terminal mode processor received an
command with an invalid parameter.
DISPLAY
M odule-ID = VTMUPD RC = 6549 D01 = 05
This error occurred because the virtual
terminal mode processor received a
or
MODE RESET MODE
with an invalid parameter.
Module_ID = VTMUPD RC = 6549 D01 = 06
This error occurred because the virtual
terminal mode processor received a
GRAPHIC RENDITION
an invalid parameter.
M odule-ID = VTMUPD RC = 6549 D01 = 07
This error occurred because the virtual
terminal mode processor received a
CHARACTERSET
invalid parameters.
M odule-ID = VTMUPD RC = 6550
This error occurred because the virtual
terminal mode processor detected an
unsupported escape sequence.
M odule-ID = VTRUTLPF RC = 01
The resource controller tried to add a font to
the font table in the resource structure and the
IOCN for the font is unknown to the VRM.
M odule-ID = VTRUTLPF RC = 02
The resource controller tried to add a font to
the font table in the resource structure and
Appendix B. Error Log Entries B-17
command with an
AREA
ERASE
SET
control sequence
SET
control sequence with
SET
control sequence with