S u b cla ss = 03 A IX P rogram E rror
M ask = 03 AIX K ernel
S u b cla ss = 04 A IX D ev ice D river P rogram Error
M ask = 01 B ase LAN D ev ice D river
An I/O channel error has occurred.
This error is probably caused by a bad device
on the bus.
The AIX kernel issues messages that are displayed
on the console. These messages appear in the error
log and are documented in
RC = (errno) vec-init call
There are no more interrupt sublevels available
for the device. Too many devices are using the
same interrupt level.
If you created some of your own devices, move
some of the devices to another interrupt level
and restart the machine. See
System Technical Reference
Device Drivers for information about the
vec-init call.
RC = 16 ATTACH SVC
The ATTACH SVC failed.
See
VRM Programming Support
explanation of the return code. Possible
reasons and actions to take:
Appendix B. Error Log Entries B-7
Messages Reference.
A IX Operating
under Creating
for an