IBM RT PC Problem Determination Manual page 259

14 File not found.
Cause: All files processed by the loadlist processor must
be under a directory name
was not found.
Id list
Action: If the VRM minidisk has been changed so that
the directory name
correct the problem or install the original VRM again.
15 No freeblock header space.
Cause: The loadlist processor found an error in its
internal data fields while trying to deallocate space.
Action: If the VRM minidisk has been changed by
adding additional code, find and remove the module that
is writing in the loadlist processor internal data fields,
or install the original VRM again.
16 Freeing free space.
Cause: The loadlist processor is trying to deallocate
space that is already free. This error can occur if an
executed module writes over the internal data fields of
the loadlist processor.
Action: See error 15 for recovery procedures.
17 Address already allocated.
Cause: The loadlist processor is trying to allocate space
that has already been allocated for another module.
Most modules that are loaded into memory by the
loadlist processor are relocatable. Relocatable modules
have an origin of X 160' (the origin of a module is
information located in the TOC header of the module),
and can be loaded into any free space in memory. If a
module has a origin other than X' 6 0', then an attempt
A directory file name
Idlist.
has been renamed or removed,
Id list
Section 5. Blinking Messages 5-9