IBM RT PC Problem Determination Manual page 263

25 Bad load module (non-fatal).
Cause: A module that was to be loaded by the loadlist
processor has invalid information in the TOC header.
This module will not be loaded, and the loadlist
processor will continue processing after displaying the
error.
Action: If the VRM minidisk has been changed by
adding additional code, find the module that caused the
error and remove it.
99 Machine or program check error.
Cause: Either a hardware problem has caused a
machine check, or a coding problem has caused a
program check.
Action: If the VRM minidisk has been changed by
adding additional code, the problem may have been
caused by the code. Install the original VRM again.
If error condition still exists, go to
Determination Guide
problem determination. If no problem is found before the
"Diagnostic Selection" menu is displayed, run "System
Checkout."
If installing the VRM again does not correct the problem
and no hardware problems are found, use your normal
problem reporting procedures.
IB M R T Problem
and follow the procedures for
Section 5. Blinking Messages 5-13