Subclass = 02 Abnormal Termination (Abend - IBM RT PC Problem Determination Manual

S u b class = 02 A b n orm al T erm in a tio n (A BEN D )
M ask = 00 VRM A B E N D M essag e
AIX Operating System Problem Determination Guide
B-6
A m achine check has occurred.
A ROMP machine check occurred that was
probably caused by a hardware failure. See
Hardware Technical Reference
machine check status.
An IAR protection exception has occurred.
An attempt was made to execute an instruction
in unauthorized memory.
A page fault occurred th at could not be
processed by the VRM.
A page fault occurred but the VRM was not in
an appropriate state to process it. The most
common cause is a page fault in an interrupt
handler.
All paging space is in use.
The paging space is full. Use the VRM
installation utility to increase the size of the
paging space minidisk.
The VRM does not have enough real m em ory
to continue.
A process or virtual machine tried to pin too
much memory.
The VRM has encountered initialization data
that is not valid.
Invalid data was passed to the VRM by the
loadlist processor or one of the loadable posts.
The VRM in unable to allocate a system
control block.
Either too many control blocks are in use or no
more real memory is available.
for definitions of