IBM RT PC Problem Determination Manual page 319

Module_ID = VTRRCICS RC = 40
During initialization, the resource controller
tried to bind the screen manager to the common
device utilities and found that either the screen
manager expected an entry point different than
the one the resource controller exports or that
the names mismatch.
Module-ID = VTRVTSV RC = 62
The resource controller tried to get the module
ID of the replacement for the standard virtual
terminal mode processor but the IOCN is
unknown to the VRM.
Module-ID = VTTGADD RC = 14
An unexpected return code was received from
while attempting to update the valuator
-ENQ
dial granularities with the requesting virtual
terminal active.
M odule-ID = VTTGADD RC = 15
An unexpected return code was received from
while attempting to update the LPFK
-ENQ
key settings with the requesting
M odule-ID = VTTSELD RC = 02
An error occurred during a
virtual display driver to the the virtual
terminal mode processor. It was caused by one
of the following:
• One or more functions or structures are not
imported with the correct names.
• The parameter lists do not match.
• The structure declarations do not match.
M odule-ID = VTTSELD RC = 03
An error occurred during a
virtual display driver. This error usually
indicates that the parameter list declarations
for the imported and exported symbol do not
Appendix B. Error Log Entries B-21
of the
-BIND
of the
-BIND