Help; Inst - IBM RT PC Problem Determination Manual

help

in st
A-22 AIX Operating System Problem Determination Guide
Flags:
When this option is specified, VMF determines the file
names in which unrelocated bad blocks reside.
Use the help command without parameters to display the complete
list of VMF commands. To get help for a particular command,
enter the command name followed by a ? (question mark).
Format:
help
Use the inst command to copy a DOS file to a minidisk. The file is
copied sequentially starting at sector 0 of the minidisk. The
previous contents of the minidisk are destroyed.
Format:
in st
dosname m in id isk-id
Param eters:
dosname
This is the name of the DOS file to be transferred and must
contain the diskette drive identifier (such as
than the first drive.
minidisk-id
This identifies the minidisk to receive the file.
b:) if other