Subclass = 08 Application Program Error - IBM RT PC Problem Determination Manual

S u b cla ss = 08 A p p lication P rogram E rror
M ask = 02 In ter a ctiv e W o rk sta tio n
AIX Operating System Problem Determination Guide
B-24
You should request less memory for the
Coprocessor when the PCSTART command is
issued. For example, 512K instead of 640K.
Module-ID = ATE
The routine logs this error during a
send
pacing file transfer if no pacing character has
been received for 30 seconds.
Verify that the pacing protocol and pacing
character at the remote site match those at
your site. Then restart the file transfer.
Module-ID = ATE
The routine logs this error at the start of
send
a pacing file transfer if no pacing character is
received for 100 seconds. The receiving site
must transmit a specified pacing character to
indicate that it is ready to receive.
Verify that both the local and remote sites are
using the character pacing protocol and that
the character chosen for pacing is the same for
both sites. Then restart the file transfer.
Module-ID = ATE
The routine logs this error during an
receive
file transfer after nine transmission
XMODEM
errors on the same sector have occurred.
If you are using a telephone connection,
terminate the current session and try again in a
few minutes to get a new, less noisy line.
RC = 1
RC = 2
RC = 3