The Trace Profile - IBM RT PC Problem Determination Manual

The Trace Profile

Before you can start the trace, you must select the
and the events you wish to trace. The trace profile is a file that
contains the areas that can be traced and is provided with the
system. Events are selected by using the system editor to change
the file.
To edit the system trace profile:
1. Type the command:
e /etc/trcprofile
The trace profile is now displayed. See the following page for a
sample trace profile.
2. Remove the asterisk (*) from the first column of the events you
want to trace.
3. If the event has a data field, enter that information also.
4. File the profile.
5. Go to "Step 1. Starting the Trace" on page 4-5 to start the
trace.
trace profile
Section 4. The Trace Utility 4-3