Table of Contents
Advertisement
Copyright 2000, Avaya, Inc.
All Rights Reserved
Printed in U.S.A.
Notice
Every effort was made to ensure that the information in this book was
complete and accurate at the time of printing. However, information is
subject to change.
Your Responsibility for Your System's Security
Toll fraud is the unauthorized use of your telecommunications system by
an unauthorized party, for example, persons other than your company's
employees, agents, subcontractors, or persons working on your com-
pany's behalf. Note that there may be a risk of toll fraud associated with
your telecommunications system and, if toll fraud occurs, it can result in
substantial additional charges for your telecommunications services.
You and your system manager are responsible for the security of your sys-
tem, such as programming and configuring your equipment to prevent
unauthorized use. The system manager is also responsible for reading all
installation, instruction, and system administration documents provided
with this product in order to fully understand the features that can intro-
duce risk of toll fraud and the steps that can be taken to reduce that risk.
Lucent Technologies does not warrant that this product is immune from or
will prevent unauthorized use of common-carrier telecommunication ser-
vices or facilities accessed through or connected to it. Lucent Technolo-
gies will not be responsible for any charges that result from such
unauthorized use.
Lucent Technologies Fraud Intervention
If you suspect that you are being victimized by toll fraud and you need
technical support or assistance, call Technical Service Center Toll Fraud
Intervention Hotline at 1 800 643-2353.
Federal Communications Commission Statement
Part 15: Class A Statement. This equipment has been tested and found
to comply with the limits for a Class A digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protec-
tion against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate
radio-frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communica-
tions. Operation of this equipment in a residential area is likely to cause
harmful interference, in which case the user will be required to correct the
interference at his own expense.
Part 68: Network Registration Number. This equipment is registered
with the FCC in accordance with Part 68 of the FCC Rules. It is identified
by FCC registration number AS593M-13283-MF-E.
Part 68: Answer-Supervision Signaling. Allowing this equipment to be
operated in a manner that does not provide proper answer-supervision sig-
naling is in violation of Part 68 Rules. This equipment returns answer-
supervision signals to the public switched network when:
• Answered by the called station
• Answered by the attendant
• Routed to a recorded announcement that can be administered by
the CPE user
This equipment returns answer-supervision signals on all DID calls for-
warded back to the public switched telephone network. Permissible
exceptions are:
• A call is unanswered
• A busy tone is received
• A reorder tone is received
All manuals and user guides at all-guides.com
Canadian Department of Communications (DOC)
Interference Information
This digital apparatus does not exceed the Class A limits for radio noise
emissions set out in the radio interference regulations of the Canadian
Department of Communications.
Le Pr é sent Appareil Nom é rique n' é met pas de bruits radio é lectriques
d é passant les limites applicables aux appareils num é riques de la class A
pr é scrites dans le reglement sur le brouillage radio é lectrique é dict é par le
minist é re des Communications du Canada.
Trademarks
See the preface of this document.
Ordering Information
Call:
Write:
Order:
For additional documents, refer to the section in "About This Document"
entitled "Related Resources."
You can be placed on a standing order list for this and other documents
you may need. Standing order will enable you to automatically receive
updated versions of individual documents or document sets, billed to
account information that you provide. For more information on standing
orders, or to be put on a list to receive future issues of this document, con-
tact the Lucent Technologies Publications Center.
European Union Declaration of Conformity
The "CE" mark affixed to the DEFINITY® equipment described in this
book indicates that the equipment conforms to the following European
Union (EU) Directives:
For more information on standards compliance, contact your local distrib-
utor.
Comments
To comment on this document, return the comment card at the front of the
document.
Acknowledgment
This document was prepared by Product Documentation Development,
Lucent Technologies, Denver, CO.
Avaya BCS Publications Center
Voice 1 800 457-1235 International Voice 317 322-6416
Fax 1 800 457-1764
International Fax 317 322-6699
Avaya BCS Publications Center
2855 N. Franklin Road
Indianapolis, IN 46219
Document No. 555-233-503
Comcode 108408782
Issue 1, June 1999
• Electromagnetic Compatibility (89/336/EEC)
• Low Voltage (73/23/EEC)
• Telecommunications Terminal Equipment (TTE) i-CTR3 BRI and
i-CTR4 PRI
Advertisement
Table of Contents
