Configuring Profisafe Via Basic Functions - Siemens Sinamics G120 Function Manual

Commissioning
5.9 Configuring safety functions and PROFIsafe using STARTER
5.9.1

Configuring PROFIsafe via basic functions

Telegram 30 is preset as default in the inverter.
Configuring the PROFIsafe address
You must set the PROFIsafe addresses in the inverter and in the higher-level control system
to the same value.
Figure 5-2
Figure 5-3
The PROFIsafe address of the inverter must be unique in the higher-level control system and
within the network itself.
Parameter
p9610
116
Example: PROFIsafe address 64 hex of the inverter in the STEP 7 hardware configuration
A
Configuring the PROFIsafe address with STARTER
Description
PROFIsafe address (factory setting: 0000 hex)
Safety Integrated - SINAMICS G110M, G120, G120C, G120D and SIMATIC ET 200pro FC-2
Function Manual, 01/2017, FW V4.7 SP6, A5E34261271B AD