Connecting The Fail-Safe Digital Output For A Sinamics G120 - Siemens Sinamics G120 Function Manual

The two signals of the fail-safe digital output each have the same state:
● High signal or NO contact closed: The fail-safe digital output is active.
● Low signal or NO contact open: The fail-safe digital output is not active.
4.5.2

Connecting the fail-safe digital output for a SINAMICS G120

Connecting a relay
Figure 4-45
Connecting an actuator with feedback signal
Figure 4-46
Safety Integrated - SINAMICS G110M, G120, G120C, G120D and SIMATIC ET 200pro FC-2
Function Manual, 01/2017, FW V4.7 SP6, A5E34261271B AD
Connecting a relay at the F-DO
Connecting an F-DO to an actuator
4.5 Evaluating via a fail-safe digital output
Installing
95