Cleaning The Neutralising System And Siphon - Buderus Logano GB125 Installation And Maintenance Instructions Manual

Oil condensing boilers with logatop be burner
Hide thumbs Also See for Logano GB125:
Table of Contents

Advertisement

11
Heating system inspection and maintenance
Cleaning the condensate pan
RISK OF INJURY
Wear suitable protective clothing and safe-
ty goggles during cleaning. Condensate in
the condensate pan and siphon can reach
a pH value of 2.
B Open the cleaning cover of the condensate pan.
B Remove condensate residues.
B Reseal the cleaning cover of the condensate pan
tightly.
SYSTEM DAMAGE
through chemical cleaning agents.
B Carry out wet cleaning of the heat ex-
changer only with water or cleaning
agents approved by Buderus.
B Fit the cleaning cover with a gasket.
B After completing the cleaning steps,
check the joints which were involved for
leaks.

11.5 Cleaning the neutralising system and siphon

Maintenance of the neutralising system is described in a
separate manual.
B Undo the condensate hoses on the siphon.
B Remove deposits from the siphon and refill with wa-
ter.
B Refit the condensate hoses.
56
Logano GB125 oil condensing boiler - Technical specifications are subject to change without prior notice.
Fig. 49 Cleaning the condensate pan
1
Cleaning cover
1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents