Roland R1000 Series Manual page 53

B0046991 / Rev. 1.6
4.3.3.2 Spring loaded sensor bracket SHS42GS with flat suction cup
The spring loaded sensor bracket SHS42GS with flat suction cup is intended for accommodating
the sensors. It is well suitable for use in feeder destacking applications (only vertical motions, no
turning motions). For usage with robotic destackers the sensor bracket SHS42G-FB (with bellow
suction cup) is to be preferred.
Suction cup
Fig. 22: Spring loaded sensor bracket SHS42GS with flat suction cup
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Double Sheet Detector R1000 series E20
Clamping bracket SHK
Spring loaded sensor bracket
Sensor
Rubber nipples
Sensor edge
Connection 1/4"
Manual
ø25
"A"
Sensor
110
View in direction "A"
without clamping bracket
ø20.5
50
110
Mounting
94
M8
25
see fig.
"Spring travel"
53