Roland R1000 Series Manual page 38

System description
Method b)
Advantageous when measuring the same sheet thickness with each sensor. Each measurement
sensor is addressed via the inputs A/B of the control unit. In addition, the result of each
measurement is available as output.
Start
PLC
1. Select program 1
2. Measuring program 1
3. Anal y sis result of program 1
4. Select program 2
5. Measuring program 2
6. Anal y sis result of program 2
7. Select program 3
8. Measuring program 3
9. Anal y sis result of program 3
10. Select program 4
11. Measuring program 4
12. Anal y sis result of program 4
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
38
Double Sheet Detector R1000 series E20
Advantage: Substantial time saving compared to program switching.
Note
1
Sensor selection via "external (inputs A and B)" must be selected in the
Note
system configuration.
Manual
Program
* If sensor selection A/B configured, the
sensor number cannot selected in the
program.
2 3 4
0.9 mm
(.035 in.)
B0046991 / Rev. 1.6
Thickness Sensor
1 0.9 mm
0.9 mm 0.9 mm
(.035 in.) (.035 in.)
- *