Common Configuration Tasks - Alcatel-Lucent 7750 SR Manual

Common Configuration Tasks

This section provides a brief overview of the tasks that must be performed to configure both local
and distributed VPLS services and provides the CLI commands.
For egress multicast groups (optional):
1. Define egress multicast group name(s)
2. Specify the destinations per pass
3. Define SAP common requirements
For VPLS services:
1. Associate VPLS service with a customer ID
2. Define SAPs:
3. Associate SDPs for (distributed services)
4. Modify STP default parameters (optional) (see
5. Enable service
Page 512
— Select node(s) and port(s)
— Optional — Select QoS policies other than the default (configured in
context)
— Optional — Select filter policies (configured in
— Optional — Select accounting policy (configured in
— Optional — Specify SAP egress multicast-group name
435)
config>filter
config>log
VPLS and Spanning Tree Protocol on page
7750 SR OS Services Guide
config>qos
context)
context)