Monitor Disassembly - Nellcor OxiMax N 5500 Service Manual

Disassembly Guide

6.6 Monitor Disassembly

This section describes the steps to separate the front and rear case assemblies.
Before the steps A and B;
50
a. Remove the monitor 's 6 screws.
b. Separate the front case from the rear case.
c. Turn down the grabbers of the Main board
cable connector on the Main PCB to
disconnect the Main board cable from the
Main PCB.
d. Disconnect the NIBP cable from the
Main PCB.
N5500 Service Manual