Nellcor OxiMax N 5500 Service Manual page 65

Disassembly Guide
B1-4. NIBP Module Disassembly
58
b. A nut is firmly on the back of the
External DC input connector. Turn the
nut to the left in order to remove it. A
nut is firmly on the back of the GND
terminal. Turn the nut to the left in order
to remove it.
c. Push both side of the latches on the AC
inlet slightly to remove the AC inlet.
a. Remove 3 screws on the SMPS bracket.
b. Remove the NIBP hose from the NIBP
module.
c. Remove the NIBP module from the
SMPS bracket.
N5500 Service Manual